Vibration Control Systems
  Active Vibration Control System, Vibration Isolation System, Vibration Isolators: Vistek Inc   Vibration Isolation Products, Vibration Control Products, Advanced Isolation Vibration: Vistek inc   Vibration Isolation Bearings, Vibration Isolation Mounts, Vibration Isolation Pads: Vistek inc   Vibration Terminology, Vibration Isolation Terminology: Vistek inc   Contact Vistek Inc.  
 
 

 Home    Vibration Isolation Platform    VIP320 Series

Vibration Isolation Platform - VIP320 Series

Rectangular shaped Platforms with three of four Vibration Isolation Bearings. The Platform is available in the following sizes: 12” x 18” (30cm x 46cm), 16” x 16” (41 x 41), 18” x 24” (46 x 61), and 24” x 30” (61 x 76). For each of these platform sizes, there exists a specific part number that should be selected depending upon the weight of the instrument to be isolated.

 PDF Download: VIP320 – Part Number System

Selecting the Correct VIP320 Platform for Your Instrument

In order to select the correct part number, you will need to know the weight of the instrument to be isolated and the plan dimensions of the base of the instrument.

Understanding the Part Number System

The Vistek PN system is very simple. Once you understand it, it will be easy to select the correct part number from the Size Selection Chart.

Sample PN: VIP320-1616-1570
VIP320 This alphanumeric designation tells you the product classification and series; “VIP” for Vibration Isolation Platform in this example, and this is the Series 320.
1616 These numbers designate the plate plan dimensions; 16” x 16” in this example.
1570 These numbers designate the payload range that the platform will isolate; 15 to 70 lbs in this example.

The Size Selection Chart is printed in an organized manner in categories determined first by the plate dimensions of the platform plate size. Within the plate dimension categories, numerous part numbers can be selected depending upon the weight of the instrument to be isolated.


Selecting the Correct Part Number is a Two-Step Process.
Step No. One
Determine the plan dimensions of the smallest plate that the instrument will fit onto. The VIP320 series is available in the following plate sizes: 12” x 18”, 16” x 16”, 18” x 24”, and 24” x 30”.

Step No. Two

From the Size Selection Chart, select a platform with the proper plate dimensions that has a payload range that brackets the weight of the instrument to be isolated. If you have more than one choice, then select the platform with a payload range such that the weight of the instrument will fall closest to the middle of the payload range.

Example - Microscope weighs 60 lbs., and the footprint of the base is 11” x 15”.

You can select either a 12” x 18” or a 16’ x16” plate. You should select either the VIP320-1218-3080 or the VIP320-1616-2580.

 
Vibration Isolation Bearings
Vibration Isolation Tables
Vibration Isolation Platform
  VIP320 Series
 
VIP320 Size Selection Chart
VIP320 Drawing
  VIP3200 for Microscopes
  VIP3200 for Hardness Testers
  Series 320/3200 Inst. Instructions
Axcis© Workstations
Lab Isolation Platforms

 

 
 
© Vistek Inc.

Home | About Vistek | Products | Resources | Contact Us | Sitemap | Download | Links

phoenix web designPhoenix Web Developmentgatesix